Home   About us   Product Specifications   FAQ   Roof Types   Satisfaction Guarantee   Order Now   Contact Us
 
Welcome to Ember Aqua Shield
 
Ember Aqua Shield
The only temporary device needed for your home or business to HELP to keep your roof from the
flying Embers from igniting the roof structure, from a local brush fire. As long as there is proper
water pressure to the unit.








Patent Pending
 
 
Installation
Place your ladder in a safe position next to the house in the center of the roof. Next, take the cap
off the unit and sit unit on the roof, connect the feeder pipe one at a time until the unit is rolled up
over the peak of the roof. Next, connect the garden hose to the unit and turn on the water source.







 
 
Spray Pattern
When you first receive your unit, you should take the unit and connect the feeder pipe with two
female connectors on it and connect the garden hose to the unit. Then turn the water source on full
and check the spray pattern. Make sure you do this while the unit is on the ground. Then practice
doing the INSTALLATION steps.







 
 
Storage
Be sure you put the cap on the unit, to keep critters from living in the unit. If you forget the cap,
when you need it, water will not spray from the unit. Whatever was living in the unit is now clogged
in the sprayer. Not good! Keep feeder pipe with unit! Make sure pipes are clean inside before using!







 
 
Home | About Us | Product Specifications | FAQ | Roof Types | Satisfaction Guarantee | Order Now | Contact Us